2005-2018 Mustang REV™ Series Carbon Fiber Driveshafts

* Required Fields

$1,499.00

These REV™ Series carbon fiber driveshafts are direct bolt-in. Designed and wound specifically for S197 and S550 Ford Mustangs, they feature the same high quality materials and benefits as the rest of our REV™ Series driveshafts and are available for the following applications:

  • 2005-2010 Mustang GT
  • 2011-2014 Mustang GT
  • 2015-2018 Mustang GT, Automatic
  • 2015-2018 Mustang GT, Manual
  • 2015-2017 Mustang EcoBoost, Automatic
  • 2015-2017 Mustang EcoBoost, Manual
  • 2015-2018 Mustang Shelby GT350

Engineered for up to 1500 HP with a max rated torque of 1000 lb*ft, QA1's Mustang driveshafts feature Spicer Life Series 1350 U-joints, and utilize a high speed CV joint with a high speed sealing boot and high temp grease. This high speed capability allows us to minimize effects of NVH while increasing performance.

What makes QA1's driveshaft the best?

  • A truly engineered system from transmission to rear end
  • Extended transmission and differential life
  • Quicker acceleration
  • More power to the ground
  • NVH testing helps eliminate driveline vibrations
  • Balanced as an assembly without the use of welded or bonded weights, ensuring a precise and more reliable balance  
  • Lighter and stronger than steel, aluminum and other carbon fiber driveshafts
  • Safer than steel and aluminum driveshafts
  • Proudly wound in-house using 3M™ Matrix Resin in QA1's Lakeville, Minnesota facility

NOTE: The Mustang driveshafts are designed for stock vehicles. Any modifications can affect fitment. Please refer to the length specifications from the tube end to the CV joint shown in Table 1 in the installation guide to confirm that the driveshaft will have the correct fitment for your vehicle.

Learn more about the development and technology that QA1 uses in its carbon fiber driveshafts on the Carbon Fiber Driveshaft Technology page.

Installation guide for 2005-2018 Mustang REV™ Series Carbon Fiber Driveshafts**

**NOTE: The Mustang driveshafts are designed for stock vehicles. Any modifications can affect fitment. Please refer to the length specifications from the tube end to the CV joint shown in Table 1 in the installation guide to confirm that the driveshaft will have the correct fitment for your vehicle.

What are the benefits of choosing a QA1 driveshaft?

Tell me more about the pieces of a QA1 carbon fiber driveshaft.

Part Numbers
 ApplicationWith SFI Without SFI
05-10 Mustang GT JJ-21209 JJ-21214
11-14 Mustang GT
JJ-21210 JJ-21215
15-17 Mustang GT, Manual JJ-21207 JJ-21212
15-17 Mustang GT, Automatic JJ-21206 JJ-21211
18 Mustang GT, Automatic JJ-21217 JJ-21216
18 Mustang GT, Manual JJ-21218 JJ-21221
15-17 Mustang EcoBoost, Manual JJ-21220 JJ-21223
15-17 Mustang EcoBoost, Automatic JJ-21219 JJ-21222
15-18 Mustang Shelby GT350 JJ-21208 JJ-21213
request a catalog
Learn more about our full line of products.