Mustang Drag Racing K-Member
QA1's tubular K-members are designed for weight savings, improved geometry and as a bolt-in swap for the factory K-member. Hard core racing applications only!
- Bolt-In Design
All mounting points have been digitally indexed from new, factory K-members.
- Mild Steel DOM Tubular Construction
- Weight Savings
28 lbs. lighter than the factory K-members with increased strength by design.
- Increased Header Clearance
Header and oil pan clearance maximized for easier maintenance and installation.
- Modular Design for Versatility
Spring perches are removeable for extra weight savings when using coil-over kits. Stock or aftermarket a-arms can be used.
- Improved Geometry
Bump steer, anti-drive and Ackerman angles have been improved for maximum performance. If the vehicle has been modified, there is a potential for tire to fender clearance issues. This k-member will change the vehicle's stance to a performance race stance.
For best results, QA1 control arms are strongly recommended.
Not for street use!